Stamp9G20
Aus Programmers Guide
TaskIt Stamp9G20
Loading I2C-Support
On the Development-System:
Install the Toolchain
tar -xvjf angstrom-2009.X-stable-armv5te-linux-gnueabi-toolchain.tar.bz2 /usr/local/angstrom/
Extract the Kernel Sources
tar -xvjf linux-2.6.29-stamp9g20.tar.bz2
cd linux-2.6.29-stamp9g20/
Do Standard-Config
make ARCH=arm stamp9g20evb_defconfig
Configure the Kernel
make ARCH=arm menuconfig
Compiling the Modules
make ARCH=arm CROSS_COMPILE=/usr/local/angstrom/arm/bin/arm-angstrom-linux-gnueabi- modules
Copy to the Develop Folder
make ARCH=arm INSTALL_MOD_PATH=/develop/modules modules_install